FreeOZ论坛

标题: 电子工程师求职 [打印本页]

作者: xq052b    时间: 17-7-2009 15:43
标题: 电子工程师求职
本人男,6年工作经验,最近3年多做数字IC前段,最早2年多做的系统级别的设计.
主要技能如下:
- Familiar with SoC/ASIC design flow (from spec to chip), be able to handle all the front end work including design and verification.
- Familiar with System Verilog, Verilog hardware language
- Familiar with Debussy, ncverilog, DC, conformal, vncover, nlint, vtran, srambist and other Front end EDA tools
- Familiar with AMBA, TCP/IP Protocol, 802.3 Protocol, USB 2.0, I2C, SPI Protocol, NAND Flash, ZSP (a DSP core of LSI corp)
- Familiar with various kinds of test skills and relevant test tools (such as logic analyzer, spectrum analyzer), able to make test plan for large project and detailed test case
- Familiar with chip test process, test management system and FPGA tools
- Familiar with broad level design, using EDA tool like Protel to design schematic and layout.
- Familiar with C and Assemble language.
总的来说,IC的经验最丰富,板级的数字电路也都可以设计
嵌入式软件也能做,不过不够senior的水平,junior的水平


希望各位兄弟姐妹多多帮忙介绍一下工作
作者: radar    时间: 17-7-2009 23:25
这个专业来澳洲很适合做labor
作者: xq052b    时间: 18-7-2009 00:23

作者: Komodo    时间: 18-7-2009 11:34
澳洲无市场
作者: fred_au    时间: 18-7-2009 12:48
我们公司的两个“hardware” guys现在天天没事干。。。。
(hardware guys: we are electronics engineers!!! Not HARDWARE guys!!! )

哈哈,开个玩笑。
其实一直以来对搞电子的同志充满敬佩。这边一些搞工控的公司也许会有一些相关职位?
作者: xq052b    时间: 21-7-2009 11:16
不是专门做测试的,不过因为工作的关系,经常要到实验室去帮AE team一起调试芯片,所以那些工具都用过,确实不精
不过不写familar,写什么呢? knowing?
作者: hover    时间: 21-7-2009 15:09
最重要的是你以前的项目是什么方向的,是通讯还是图像处理还是别的什么(澳洲无线通讯机会比较多)
其次你的相关方向的知识掌握程度,通讯的话,对协议及相关算法的理解如何;图像的话,对算法的理解如何;处理器的话,对架构的理解如何
最后你以前公司在国际上的知名度如何?是否是名牌公司(我所知道的做IC的澳洲公司不超10家,知名公司的经验在这比较管用)
作者: xq052b    时间: 21-7-2009 20:23
最早是做通信方面的,TCP/IP,10G PHY
最近一年多是做消费类电子的芯片SoC开发. 图像算法一窍不通, 没做过.
对通信协议还是比较熟悉的
之前的公司是之名公司,top10的IC Design公司
能否说一下澳洲有哪些IC公司啊,包括大公司的分公司?
作者: daigua    时间: 1-8-2009 20:31
关注
作者: ALANWU    时间: 2-8-2009 02:46
你人现在哪里? 懂ZIGBEE吗?




欢迎光临 FreeOZ论坛 (https://www.freeoz.org/forum/) Powered by Discuz! X3.2