|
|
可能是初步筛选简历以后，出一个中等复杂的项目，需要考察你对编程风格、设计模式、测试的理解。
这个项目完成好以后，他们再筛选。个人感觉这个很能够考察一个人能力的。
下面就是一个例子：
Description:
The application is a simulation of a toy robot moving on a square
tabletop, of dimensions 5 units x 5 units.
There are no other obstructions on the table surface.
The robot is free to roam around the surface of the table, but must be
prevented from falling to destruction. Any movement that would result
in the robot falling from the table must be prevented, however further
valid movement commands must still be allowed.
Create an application that can read in commands of the following form -
PLACE X,Y,F
MOVE
LEFT
RIGHT
REPORT
Where PLACE will put the toy robot on the table in position X,Y and
facing NORTH, SOUTH, EAST or WEST. The origin (0,0) can be considered to
be the SOUTH WEST most corner.
It is required that the first command to the robot is a PLACE command,
after that, any sequence of commands may be issued, in any order, including
another PLACE command. The application should discard all commands in
the sequence until a valid PLACE command has been executed.
Where MOVE will move the toy robot one unit forward in the direction
it is currently facing.
Where LEFT and RIGHT will rotate the robot 90 degrees in the specified
direction without changing the position of the robot.
Where REPORT will announce the X,Y and F of the robot. This can be
in any form, but standard output is sufficient.
A robot that is not on the table can choose the ignore the MOVE, LEFT,
RIGHT and REPORT commands.
Input can be from a file, or from standard input, as the developer chooses.
Provide test data to exercise the application.
Constraints:
The toy robot must not fall off the table during movement. This also
includes the initial placement of the toy robot. Any move that would cause
the robot to fall must be ignored |
|
发表于 9-1-2015 12:38:46
收藏
赞
踩
发表于 9-1-2015 12:41:54
发表于 9-1-2015 13:15:09
楼主
. 土澳这技术
